Does anyone know where to get some of these? All you can get from Mazda
is a complete wiring harness for $450. I lost one of the spring clips
that holds the connector on.

Chuck Dunlap

Chuck, two places.  You might try ThePartsTrader.com, I've often seen
harness offered.  Or you might try Mazdaparts (Salvage Yard out of Atlanta
GA).  But, sometimes you might get lucky and find one at your local salvage
yard.  I don't use the Mazda Connectors so can't offer any direct help on
the spring clip.

However, here is the web page with the connectors I use from MSD (only fits
injectors with the center key tab on the injector connector), but they do
fit the 460/500 cc/min Mazda Injectors and are certainly cheaper than $450.
I forget what they cost me but it seem like on the order of $5.00 of so,
perhaps a bit more.

http://www.msdignition.com/

Look under "Fuel Management" and then under "Accessories"

Ed Anderson

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.