Yes or you can use a thicker wall al pipe and turn it on the lathe
 to fit the wiggins. The thicker wall will weld easier to the
 water pump. I'll look around and see what I have that will work.
 I'll turn it on the lathe and send it to you. Are you going to
 bond on the wiggins on to the pipe? It will be easier if
 you weld it on as then you can use larger pipe.

 Send me a picture of what you have so far. Here are a few pics for
 those that are not familiar with wiggins.

 Paul Lamar

I picked up some AL pipe from McMaster and will give a try at making it. If I
run into trouble may take you up on offer.

Bill Schertz
KIS Cruiser #4045

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.