Hi, Paul.....after sending a picture of my Ross shaft that I removed, I was informed that I do not
have a 2.17 to 1 redrive, but rather a 2.85 to 1 redrive. Not too long ago there was a posting of
a Ross 2.17 to 1 redrive showing all of it's internal components. Do you know if one is available
for the 2.85 to 1 redrive? If so, I sure would like to download it. Also, if anyone has any of the
original docementation that might have came with the Ross unit, I would be more than happy to pay
for copying and shipping costs, etc.
Last question....I would like to further dissasemble the unit to see if it has a thrust
bearing. Any guidance available? (Or does the 2.85 to 1 redrive, being a later version, possibly
already contain the thrust bearing or similar fix/improvement compared to the 2.17 to 1)? Thanks
in advance for your reply. Paul Conner, Mobile, AL
They are nearly identical. In the 2.17:1 case power is taken from the
ring gear and the planet carrier is fixed. In the 2.85:1 case power
is taken from the planet carrier and the ring gear is fixed.
It is very difficult to take apart a Ross redrive. You must
drill out pins and press things apart. You don't need
to do it as the thrust bearing in question goes behind the
sun gear (tractor).
This is a 2.17:1. Like the 2.85:1 the thrust bearing in question
goes between parts 9 and 10.
The second picture is where the sun gear lube line goes.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.