Al Gietzen wrote:

     What sort of connecting plug is used for the spark plug wires to the LS1
coils?
     Obviously not the standard wire set to distributor cap plug.

     I didn?t get flywheel attach bolts with my engine or the flywheel. Are
they special and
     should I get these from Mazda? Also I notice there are (were) four
little tabs at an
     angle toward the outer part of the flywheel. Two of them on the used
flywheel I got are
     broken off, and one is bent and cracked at the base. What were these
for, and is there
     any reason not to just break off the remaining two.

     Any body have a spare connecting plug for the crank angle sensor.  It is
the square
     4-pin connector, presumably stock 20B but probably used on others.  The
connector on the
     CAS is the 'cap' with the pin sockets.

     Thanks for help.

     Al Gietzen          alventures@email.msn.com

-Bulent Aliev wrote:

Tracy mentioned to me at Shady Bend that he will remove the tabs from the
flywheel. He said they are there to move the air and help with cooling the
transmission in a car, but in our engines they will create drag on the
flywheel and use power.
Bulent

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.