Al Gietzen wrote:

     What sort of connecting plug is used for the spark plug wires to the LS1 coils?
     Obviously not the standard wire set to distributor cap plug.

     I didn?t get flywheel attach bolts with my engine or the flywheel. Are they special and
     should I get these from Mazda? Also I notice there are (were) four little tabs at an
     angle toward the outer part of the flywheel. Two of them on the used flywheel I got are
     broken off, and one is bent and cracked at the base. What were these for, and is there
     any reason not to just break off the remaining two.

     Any body have a spare connecting plug for the crank angle sensor.  It is the square
     4-pin connector, presumably stock 20B but probably used on others.  The connector on the
     CAS is the 'cap' with the pin sockets.

     Thanks for help.

     Al Gietzen          alventures@email.msn.com

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.