> >  > > Jerry Hey wrote:

 >>  > >
 >>  > >   Paul,   What do you think of this louver lay arrangement?  Jerry
 >>  > >
 >>  >
 >>  > That ought to work great.
 >>  >
 >>  > Paul Lamar
 >Russell Kent wrote:
 >>
 >>  This image did not get through cleanly.
 >>
 >>  Russell Kent

 >I got it OK but here it is again.
 >
 >BTW Jerry you need the sides of those flaps closed too.
 >
 >Paul Lamar

 Yes, I am aware of that.   When are you setting up your test rig?
 Any chance you could test my rad with louvers and plenum.   I can
 bring it down around the end of Nov or beginning of Dec.   Jerry

I hate to commit to anything now as I have a really full plate.
If you come down and help I think we could do it in one day.

Can you build the box before you come down? Do you have a truck?
Perhaps your rad will fit my test box.

Paul Lamar

Paul,  you can count on my help.  I too am booked up until the end of
Nov. Any time after that is good for me.  If it takes one day or two
that is fine.  Jerry

OK I was planning on taking some more pressure measurements so that
will be fine. If you could build the box up there using 3/16 inch copper
tubing for the velocity taps that would save a lot of time.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.