> >  > >  > > Jerry Hey wrote:

 >>  >>  > >
 >>  >>  > >   Paul,   What do you think of this louver lay
arrangement?  Jerry
 >>  >>  > >
 >>  >>  >
 >>  >>  > That ought to work great.
 >>  >>  >
 >>  >>  > Paul Lamar
 >>  >Russell Kent wrote:
 >>  >>
 >>  >>  This image did not get through cleanly.
 >>  >>
 >>  >>  Russell Kent
 >
 >>  >I got it OK but here it is again.
 >>  >
 >>  >BTW Jerry you need the sides of those flaps closed too.
 >>  >
 >>  >Paul Lamar
 >
 >>  Yes, I am aware of that.   When are you setting up your test rig?
 >>  Any chance you could test my rad with louvers and plenum.   I can
 >>  bring it down around the end of Nov or beginning of Dec.   Jerry
 >
 >I hate to commit to anything now as I have a really full plate.
 >If you come down and help I think we could do it in one day.
 >
 >Can you build the box before you come down? Do you have a truck?
 >Perhaps your rad will fit my test box.
 >
 >Paul Lamar

 Paul,  you can count on my help.  I too am booked up until the end of
 Nov. Any time after that is good for me.  If it takes one day or two
 that is fine.  Jerry

OK I was planning on taking some more pressure measurements so that
will be fine. If you could build the box up there using 3/16 inch copper
tubing for the velocity taps that would save a lot of time.

Paul Lamar

 I will need an idiot proof drawing.  Jerry

OK :-) What are the exact dimensions of your rad core? Just the core!
Are you planning on mounting it long ways?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.