Don Dunbar wrote:

Hi Paul,
This is a non Rotary question! What pressure is the hydraulic braking system designed for, Tubes and fitting.
Regards Don

The pedal ratio is on the order of six to one and a big guy
can exert over 200 pounds. That is a force of 1200 pounds.
Master cylinders range from .5 inch diameter to one inch diameter.
Let's say it is a half inch. The area is 1/4 X 1/4 X pi or pi
divided by 16 or .19635 area in square inches. That
will give a brake line pressure of about 6000 psi.
A one inch diameter cylinder has a an area of pi/4 or
or .7854. 1200/.7854 is 1500 psi.
 
Paul Lamar 
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.