Here is an idea I had this morning. The pressure tank
is made from roughly a six inch diameter aluminum pipe
and welded directly to the water pump out let.
It uses the Ian Beadle cooling system design.

Saves two cooling plumbing joints and a mounting
bracket for firewall mounting. Also might save one or
two plumbing angles as the outlet can come straight out
of the bottom of the can for direct connection with a
bottom mounted rad. The part extending up above the
pump can be tailored to the room you have under the cowl.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.