Anbody know this 'Turbo Tom' Wyatt, July 2002 Kitplanes Page 32
he would be a good source of info if anybody knew.
George (down under)

I do not know him but please read all three parts to his story.  He put

a

turbo Subaru motor in an RV-4.  After lots of trial, he ended up with a
small compressor and a large exhaust A/R housing.  He burned a

piston on

his

first setup and spent lots of money.  It makes you think!
Ernesto

Ernesto,
Thanks for that info - makes one wonder about 'so called' consultants, in
this case a 'turbo consultant'.
I just thought if someone knew him he might be able to clarify the 13 b
needs, but apparently he's not so hot !
Thanks for the feed back.
George (down under)

George,

  I talked with him on a turbo installation on my 350 Chevy/67 Camaro back
in the late 70s. He's probably forgotten more about turbo installs than
I'll ever know. I think you've drawn the wrong conclusion. It's not that he
doesnt know - its that there is more to it than meets the eye. I wish you
guys who are pursuing the turbo path luck.

Mike Wills

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.