Jerry Hey wrote:

Paul,   I made an adaptor to replace the top water pump neck with  a
1"  female pipe fitting.  The adaptor can either house the thermostat
or be cut down even more if a thermostat is not being used. The short
version is 1.375 inches high.  The thermostat version is 2 inches
high.  I plan to use one inch AN fittings and hose through out.
Jerry

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.