Jerry Hey wrote:

Paul,   I made an adaptor to replace the top water pump neck with  a
1"  female pipe fitting.  The adaptor can either house the thermostat
or be cut down even more if a thermostat is not being used. The short
version is 1.375 inches high.  The thermostat version is 2 inches
high.  I plan to use one inch AN fittings and hose through out.
Jerry

Hi, Jerry....Are you considering making these for resale?  Thanks in advance
for your reply. Paul Conner

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.