Hi, Paul....I have my 13B mounted on my SQ2000, and I find that the alternator needs to be
relocated, and the water pump neck is too tall to fit the cowling without making an unsightly,
draggy "bump" in the cowling.  I seem to recall recently a photo of another builder's solution
where the alternator was moved to the side, and a much lower water pump neck was used. Any
info/pictures available that might help?  Attached is a picture of what I presently have. Thank
you for your time and research.  Paul Conner, Mobile, AL

Yep. Happens alot of the time. Well I did some surgery
on my pump. Here is a picture.

I don't recommend putting the press cap here anymore. I think Ian's
system would work better.

This will take several messages.

Paul Lamar

Has anyone measured the water pump flow, or know what it is?
Thanks
Royce

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.