Paul Lamar wrote:

Oh Ed BTW while you are at it. The water temps at the input to
the evap core and the outlet from the evap core would be very
very interesting. Just wrap the TC's to the outsides of the pipes
with a bit of teflon or silicon rubber tape. I'll include
a roll if you don't have any.

Probably should do the same for the oil cooler.

Russell Kent

Yes. Good idea Russell. We have eight to work with.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.