Tom Kendall wrote:

Well, I finally got it all together.  Here are photos of the prototype
manifold for the 20B engine.  Came out fairly well.  There's about
1/16"
oversize on the edges of a couple of the openings in the flange face,
but if
that bothers anybody that is what DevCon was made for!
I can have these poured and machined locally, but I am going to shop a
bit
to see if I can find a foundry & machine shop with better rates.
Should be
able to start shipping in late winter/early spring (sooner if you want
to
pay the local rates!).

Let me know if you are interested.

I'm interested,
Chris Cosman
microcosman.com

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.