Subject: remote mount belt driven water pump on Rotorway Exec?]
From: ACRE NL
Date: 11/21/2002, 9:41 PM

abc abc wrote:

Paul

While the conversation about water pumps is on.

Not sure if it has been spoken about,or even if it`s any good:(.

http://www.fordmuscle.com/archives/2000/08/electricwaterpump/index.shtml

It takes anywhere from 15-20% of an engines total horsepower to drive a stock waterpump at high
engine speeds. Hmmmmmm really!!(pinch of salt please)

Operating Voltage 4V DC to 14.5V DC
Maximum Current 7.5A
Flowrate 300 gal to 1300 gal/hr @ 13.5V DC
Operating Temperature -5 F to 270 F
Pump Design Clockwise centrifugal with volute chamber
Motor Life 2000 hr. continuous at 180 F and 12V DC
Pump Weight 2lb

Additional benefits: Removal of thermostat, ability to cool engine after shut down

http://www.daviescraig.com.au/trade.html  has many graphs

More efficient coolant flow could lead to smaller radiator size, smaller fans and less coolant
volume, ie: Now have the ability to optimise the cooling system for cost and weight!

Bye

Pssst hey Mister, want to buy this 100 MPG carb? How about the Brooklyn
Bridge? Cheap. I told Chrissis if I ever have somebody upload these
lies yet again I would have to kick him off the list :-)

This is the dumbest one of all. 300 gallons an hour with only .135 HP.
WOW! That is as close to a perpetual motion machine you will ever find.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.