> > > Hi Paul and group,
> > > I have just found the box that my PRSU planetary gear came in.
> > > Well the part number is YC3Z-7D006-CB planet. other numbers are
B969F
> and 061801 this on a Ford sticker with a bar code.
> > > On the other side of the box is 4R1 40BN Planet rear 845-F1
with more
> bar codes
> > > This is the six planetary gear.
> > > Hope this will help any one looking for gears.
> > > Regards Don
> This may also help
> George (down under)
Hi Paul,
The quote from Slausons seems to be the front gear set without the outer
holding teeth which could be better for a 2.85 ratio as the outer
rotates. Regards Don
Don,
I spoke to Luke at Slausons, who says that the toothed Annular (ring gear)
is from a 3 and 4 pinion set-up and the one he quoted me was the latest
Annular with the 6 pinion set-up. (God knows what it looks like- but I will
pass on photo's, finally got a digital camera)
It would appear some 3 and 4 pinion are interchangeable and can therefore be
used with the 6pinion, but not all are interchangeable (as past ACRE posts
would indicate)
I guess if I need a toothed Annular (and mine comes without teeth) I can
always get another one cheaply enough.
George (down under)
I don't think anybody said all parts where all interchangeable. They are not.
Sorry if you got that impression from me. There is a front planetary
and a rear planetary. Some TX C6 versions (OD version?) have three
planetary as I recall.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.