Mark wrote:
Another way to do the same thing is to import the bit map into a CAD
program
(most support this) and then trace the rotor housing and ports over
it,
scaling the whole thing to a know dimension. If you then print out
to scale
on an A3 (2xUS Letter is??) lasar printer, you should have a paper
template
accurate to within a mm or less.
Mark Wrathall
> www.rotary.microcosman.com
It did not work for me, but I would really like to receive a cad file
of the rotor housing if you got the time. Jerry
Mark wrote:
Jerry,
here is the drawing in AutoCAD V14 format scaled to a rotor housing inner
surface height of 240mm. Measure a housing's long axis and scale the whole
drawing, centered on 0,0 to a scale of "your housing measurement" / 240.
If you need another format like DXF or STL just let me know.
If you print (at full scale on a lasar printer) the layer "Housing" you will
get my best shot at the port timing.
The housing inner surface is not a perfect fit as mine is a mathmatically
derived trochoid, and Mazda's deviates from that to make it work.
Scaling the small .jpeg Paul sent out means you end up trying to use a line
of best fit across the fuzzy scan lines . Unless there is a higher
resolution scan of that SAE paper out there, and the printed photo in that
paper is resonably large and high quality, I can see how this is only a
rough guess. Now you need a photo square on to the port to get the other
dimension - width.
We need someone to make a bunch of these with small variations and dyno test
them to see whether the Le Mans rotary is like a two stroke, and very
sensitive to small changes in port timing (in which case this method is only
a rough starting point), or whether the rotary is more tolerant of small
changes in timing, and breathes easier as the ports get bigger. Any takers?
:)
We also need to take into account that the Le-Mans engine was designed for a
24 service life. Peripheral ports this big may have some nasty durability
issues waiting.
Regards,
Mark.
Download the Lemans engine SAE paper Mark. No wear.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.