> Whoa there Paul!
> Don't repress your fellings there- it's unhealthy! Let it alll out.
>
> I've got a question for Bill, since I'm going to run my evaporator cores
in parallel- what size outlets is he using?
> Thanks,
> Brian Trubee
The tubing from the pump to the evaporator core is 1-3/8, and the tubing
going into the core is 7/8", with 3/4" hose connecting the outlet back to the
1-3/8 tubing. this was shown in some earlier pictures.
Bill Schertz
KIS Cruiser #4045
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.