Perry Mick wrote:

I'm going to have to take my engine off soon to repair some annoying oil
leaks. So I thought while I have the engine off would be a good time to
weld up the new engine mount.  This is based on the LEZ mount you came
up with a year or so ago, but modified to use the stock 2nd gen mounting
points on the engine instead of a plate between the engine and the oil
pan.  The parts bolted to the engine holding the rubber isolators would
be made out of 1/2 x 2.5 inch 2024 available from Aircraft Spruce.
Hopefully you can make sense of it, some of the invisible lines are
invisible and others are not.

--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

Looks good to me Perry.
BTW got any pictures of the current louvers orver the oil cooler?

Paul Lamar 

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.