Vance W Jaqua wrote:
Attached shoul be a jpeg and a dwg file from autocad 12 of
the 13b housing with rotor positions at 30 degree e shaft
increments (about 10 degree rotor positions) the scaled
le mans intake port limits are shown, compared with the
locations stated as factory peripheral port timing, The
drawing is at full size in inches, and the jpeg is a jpeg.
The big difference of the race port appears to be an early
opening, the closing is the same or maybe actually a degree
or so earlier,
rough angles appear to be
factory peripheral le mans
IO 86 BTDC IO 105 BTDC
IC 75 ABDC IC 74 ABDC
EO 73 BBDC
EC 65 ATDC NOT CHCKED
Vance J.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.