Paul, Has anyone tried a screen type tray rather than the near solid plates I have seen on some
of the mounts? I understand how some of the guys are using the plate for stiffness in the eng
mount. In the earlier days of V8's they used a solid windage tray in error as the oil flung off
the crank shaft often as not bounced off and made the crank look like a taffy pull when viewed
using slo-mo photography. Bill Jenkins the drag racer worked with the chevy engineering staff to
develop better crank scraper and dry sump systems. They found the more oil they could get out of
the engine the more hp they made. The mazda uses much more oil cooling of course, but getting the
oil separated and back in the pan sooner might result in some "free" HP. Just a thought. Billl
Jepson
The wankel is a different situation. The e-shaft is up in the center
of the engine. The tray we are using mainly is an attempt to separate
the foam from the oil.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.