Thanks again Bill. We should have some water temp drop data from Ed
any day now. With your data and Ed's temp data we could then get a
feel for the BTU's rejected by the evap core cooling system.
BTW Our project to simultaneously record GPS data and rad air & water
temp data has been delayed a week or two. The GPS turned out to be
a Chatty Kathy hogging RS232 time so we need a way to disconnect it
and reconnect it once every couple of seconds. Turning the
power off & on is not a good idea as it takes the GPS
awhile to recover.
Anybody know of a good quad CMOS analog gate that will work
with RS232 signal levels (+/- 12 Volts) ?
Paul Lamar
The MAX243 is a nice RS232 tranceiver that runs on 5V.
I measured the air temp rise on the oil cooler & right side rad last week.
~ 40 - 45 on the oil cooler & 43 - 48 on the rad. Depending on power setting
& climb or cruise condition. Much smaller range than I expected but it did
confirm my suspicions that a 10 degree rise would be far lower than optimum.
Will be interesting to see how Ed's temps compare.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
I'll check out the MAX243 Tracy. Thanks.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.