Subject: Coming Model From Honda Sprouts Wings: Will It Fly?
From: ACRE NL
Date: 12/3/2002, 9:26 AM


 What do these people think they
know that GE, Rolls Royce, Pratt & Whitney and Garrett not to mention the
Russian engine builders don't know?

That is why most of them look like pregnant guppies :-)
Pregnant guppies are not low drag.

Paul Lamar


  "What do these people think they know that GE, etc..... dont know?"
That's the same question that the typical motorcycle enthusiast and most
motorcycle manufacturers were asking about Mr. Honda in the early 1960s. We
know how that turned out.

  As for the aerodynamics of a pregnant guppy, I know you've seen the
Questair Venture. Seems to be a reasonably low drag airframe.  :-)

  I dont think a large established company like Honda really fits the mold
of a stock scam artist. I doubt they'd invest millions if they didnt think
there was some probability of success. But as you say the proof will come
one way or another when they actually fly.

Mike Wills

What is your point? A Honda motor cycle engine was never ever 
25% to 50% better than some other motor cycle engine at any time. 
That is what it is going to take to make a successful small 
turbofan jet engine.

The Questair Venture does not look like a pregnant guppy. It looks
like an egg. The Questair Venture holds way less than 100 gallons in
the wing.  So what you are saying is the small jet should look
like an egg but should be twice the volume of a Questair Venture so
it can carry 400 gallons of fuel along with four passengers in 
a pressurized fuselage. If you would like to make some fuel tank size 
calculations (instead of just me for a change) a gallon 
equals 231 cubic inches.

Did I say this was a scam? It is merely ignorant on several points.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.