Subject: Periperal Port size and Timing (Leman engine)
From: ACRE NL
Date: 12/4/2002, 5:53 AM


Lynn, was any of the 12A periphery port engines ever dynoed, and if so what
kind of
 > HP did they make?
 > Royce


Lots of dyno time on the Pports. Not by me, I only have one of them right
now. Still in the old car. But the boys with the extra engines to spend each
weekend were getting 290 HP for long races at 10,200 RPM and 310 HP for short
races at 10,700 RPM. The best Bridge ported 13B I have heard of so far is 305
HP at 9,200.
Just a guess at 6,500 a bridge ported 13B with everything dialed in should do
225 HP. Maybe 205 HP at 6,000 RPM.  A home built Pport should do maybe 10HP
more. The engine is not working (stress) very hard at 6,000. It also is not
pumping much air. So the power is way down. Last fall my friend was getting
259 HP on a real good (Ohio) dyno at 9,000 RPM. It is a very mild bridge
ported 13B. The horses in Ohio pull Budweiser wagons. The horses in the
peoples republic of California are found in petting zoos. Correct everything
to sea level on a standard day. Then divide the advertised HP by your hat
size to get into the ball park.

Lynn E. Hanover

That may be true but the fastest rotary engines in drag racing
come from Commie California regardless of what is claimed on the dyno.
Since 1997 Abel has added 30 MPH and cut a full second off this time.
They are just as fast in New Jersey.
We may be left of Lenin but we do know how to build fast cars :-)

Paul Lamar

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.