George Lendich wrote:

Paul,
See if these drawings work, the GIF seems to compress it more than the JPG
George (down under)

Thanks for converting those George. You can lose the stock bulkhead
and the stock needle bearing if you do the double ball bearing trick.
Also the housing diameter can go down to just under the ring
gear diameter as you will be pressing that in.

Paul Lamar

Also I forgot to mention.. you can  cut the width of the ring
gear to just wide enough for the planet gears. Saves a bit of 
weight.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.