Subject: Aircraft rotor heads in the North East.
From: ACRE NL
Date: 12/9/2002, 6:19 AM



What a deal.
Give me your address and we will send you a shaft to practice
on.
Since it will be cut down anyway you can test the front main
journal,
and the
front rotor bearing journal.  We use the rear rotor for the
single
rotor.
Royce

I have a couple of shafts just vegetating, and have no problem
testing
them on areas other than bearing surfaces. (due to the indentation).
However, if you have a shaft to send, and do not care where it is
tested,
it can be sent to my airport shop.
Land-Air Design, LLC
127A Perimeter Road
Boire Field
Nashua, NH
03061

Archie we sent the shaft out today.
We included a note, and a prepaid return label for UPS.
You can test the pulley  extension, and the front main and rotor
journals to
your hearts content.
We can then use the rear main and rotor journals for a single rotor.
Thanks

Royce

Bruce Ryan wrote:

Archie
I fly out of LWM and would like to talk with you about rotary projects in
our area. Could you provide a phone number or email address ?
Thank You
Bruce Ryan

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.