> > >Jerry Hey wrote:

 > >>
 > >>  Paul,  here is "my" drawing of the insert.  Everybody should be aware
 > >>  that I have borrowed heavily from your previous drawing posted on the
 > >>  web site.   Any screw ups I take full credit for.  Jerry
 > >
 > >>  Tailwind & Rotary Engine Support
 > >>
 > >>  http://www.j-winddesigns.com
 > >>
 > >>  mailto:j-winddesigns@thegrid.net

 > >Looks good Jerry. Should work great.
 > >
 > >Paul Lamar

 Jerry,  Are you going to create these via CNC?  If so What would
you charge to have a couple extra
 made?

 > Tom Webber

Hi Tom,  Yes CNC.  Design is still evolving but they will be made
available to everyone who is interested.   Jerry

Tailwind & Rotary Engine Support

http://www.j-winddesigns.com

mailto:j-winddesigns@thegrid.net

Put me on your list.  I don't have access to the machines.  I've learned to G-Code this simester.
Final is Wednesday.  Now I can concentrate on building the RV-8A.

Tom Webber

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.