Jerry Hey wrote:

Paul,  I have revised the insert design to have a straight through
flow.  The insert is now centered on its own opening and closing
events instead of the Leman port's.  The throttle plate is moved away
from the housing a little to provide room for the EC-2 pressure tap.

Tracy does that look o.k.?    Jerry

Tailwind & Rotary Engine Support

http://www.j-winddesigns.com

mailto:j-winddesigns@thegrid.net

You need a bit of taper and radius on that retaining bump.
If he is doing it on an NC lathe that should be no problem.
Makes it easier to get the hose over the bump.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.