snipped

Paul old mate!
I am considering a 12A - for all sorts of reasons. I'm guessing this
manifold won't fit a 12A, because of the length difference !?
George (down under)

Correct. No way.

Paul Lamar

-> George mind sharing the reasons for using the 12A?

We are as well.
Royce

BTW folks I have two 13B 86-93 defective 4 port intake manifolds. 
One has a .2 inch core shift downwards on one outer port and will 
requires some tig welding and die grinding.

The other the outer ports are only slightly too wide (.050) so
you could port the cast iron end housings to fit. The mating surface
on this one still needs to be machined and the mounting
holes drilled.

I am a perfectionist and I require the ports to mate to 
the manifold perfectly :-)

$75 dollars each. You pay shipping.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.