BTW folks I have two 13B 86-93 defective 4 port intake manifolds.
One has a .2 inch core shift downwards on one outer port and will
requires some tig welding and die grinding.

The other the outer ports are only slightly too wide (.050) so
you could port the cast iron end housings to fit. The mating surface
on this one still needs to be machined and the mounting
holes drilled.

This second one sounds like it would work well with my 6-to-4 engine (was 6
now 4 port).  Can you shoot me a picture?  Is your snail mail address still
830 East Santa Maria St?

I am a perfectionist and I require the ports to mate to
the manifold perfectly :-)

(I'm semi-employed right now so I have the time to fiddle with it  ;-)

$75 dollars each. You pay shipping.


Paul Lamar

Mike

Mike McGee, RV-4 N996RV, O320-E2G, Hillsboro, OR
13B in gestation mode

Sorry Mike. Both sold.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.