I don't think those are tangential. Here is Dave Atkin's Inconel
tangential. Weighs less than four pounds as I recall and it
is indeed quieter than a 172 with a different sound of course.
The down pipe is a bit too restrictive IMHO.
Paul Lamar
Paul,
Dave's muffler may well be Inconel and may be as light as 4 pounds. But
it appears from the photo that the exhaust flange is one of those 1/2"
thick mild steel pieces from Racing Beat. That flange alone probably weighs
8 pounds. Just dont want anyone to be disappointed if they spend huge $ for
Inconel expecting a 4 pound exhaust and wind up with one that weighs 12 pounds.
Mike Wills
You got a good point there Mike.
It is not as bad as you think. If it were 1/2 inch thick
it would be about 4.7 pounds. 3/8 is more like it and that would
be about 3.5 pounds. The lightest thing to do is do what Everett did
and go to a four bolt exhaust flange.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.