Snip
Some of the single rotor engines we have seen on the web say their rotor

is air cooled. (don't see any cooling fins on the mazda though. Maybe
they just let the air in the engine absorb the heat)
Royce

Mark Wrathall wrote:

That would likely be one of the Norton or Wankel GesmbH engines. Different
beast to a single rotor Mazda conversion. The Air cooling was also called
charge cooling as they port the incoming charge through the rotor to cool
it, and lube the needle roller bearings, before porting it to the CC.
Mark

Thanks Mark
That will work.
Royce

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.