Subject: Recommended oil filters for Mazda rotary
From: ACRE NL
Date: 1/6/2003, 4:15 AM


I have seen an interesting study on oil filters. The comparison of all
commercially available
filters were used with interesting results. The high end of oil filters
was those available from
Amsoil.They were superior in filtration capability but they came at a
price. Of all the available
filters on the market, Fram and Wicks tested the worst with poor
materials and common failure of
parts, like bypass valves. Interesting enough I got the data from a
rotary enthusiast off of his
web site. It showed for the money that AC-Delco rated highest in
materials and quality for the
money of most availabe filters. Mazda uses superior filters as well but
that is usually a dealer
item and will generally pay as much as an amsoil filter. The remote set
ups that we use lend
themselves to easy amsoil adaptability. I am partial to the lubricants
that they produce but I was
not involved in the study. I am just the messenger.
Doug Mueller
RX-6 13BT
Henderson,NV


Let me clarify one part of Doug's message. One of the filters that was
labeled as less well made was from "Wix," not "Wicks," the aircraft parts
supplier in Highland, IL.

I think the survey to which Doug refers is the same one found at
http://www.scuderiaciriani.com/rx7/oil_filter_study/

Barry Gardner
Wheaton, IL

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.