It always amazes that this handful of gears that I can hold
at arms length are strong enough to transmit 200 HP
continuously. They only weigh about six pounds.
Old Lou Ross was a genius for coming up
with this PSRU concept.
Thank you Ford and Lou Ross. May Lou rest in peace.
Paul Lamar
-George Lendich wrote:
Paul,
You know their is some criticism of the Ross PSRU but when it all boils
down
he did a marvelous job on getting it al together i.e. thinness of
housing
and shaft for weight savings and although the bearings are somewhat
minimalist in design, but they seem to work OK except for the rear sun
gear
thrust bearing which was non existent - over all a bloody good job.
Interestingly I was speaking to a Diesel mechanic who has his own large
business and he was telling me the M-Benz trucks have a similar
planetary in
the axels and guess what - they had serious thrust problems, it would
seems
they omitted a thrust bearing.
Having very limited room guess what they used, flat brass bearing -it
seems
it does the job !
George (down under)-
I agree George. Except for a few minor details like the missing sun gear
thrust bearings the original Ross was brilliant. Too bad they are not
still
in business. It was a simple matter for Ross to add the trust bearings on
the latter versions as in this picture. This consisted of several low cost
needle bearings back to back reducing the RPM of each, greatly and
disproportionally increasing their life. This alone was a brilliant idea.
A simple needle thrust bearing will take a tremendous amount of load
as long as the RPM is kept low.
Paul Lamar
-William Stevenson wrote:
Hi Paul Do you know where I could get the thrust bearing installed for a
Ross 2.17:1 redrive. Thanks Bill-
Anybody want to tackle this job for Bill? It will probably require some grinding
on the stock Ford sun gear to gain clearance necessary for the
thrust bearing.
I am tempted do it but I am over committed right at the moment.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.