Perry Mick wrote:

Here are some shots of the throttle body.  Stock Mazda with the springs
reversed of course.  I also moved the throttle cable to the other side.
The home-made dynamic chamber is a little on the small side, we will see
how that works. The dynamic chamber was built up on a plastic base that
is a stock part, has various vacuum holes in it that I plugged.  The
little sensor is the stock air temperature sensor. The big 3" diameter
inlet to the throttle body will connect directly to the outlet of the
airflow sensor.

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.