Ed and others that may be interested.
Here is the final schematic Ed. I'll also try to
print it and send it in the box along with the switch
and second RS232 K thermal couple module.
My old GPS failed (I think) so I cannot test it with both the GPS
and the module. 

Make sure your GPS TX and RX are connected correctly.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.