They are noticably heavier than an equivalent exhaust made out of

0.065

but,

I am pleased with their performance.  Based on the wear so far, I

expect

never to have to replace the headers for that reason.

Ed Anderson

Ed have you looked at your sound suppressors inserts lately?. Yvon.

Ed Anderson wrote:

No, Yvon, I have not yet done that.  I plan on doing my annual inspection
this month and will pull the exhaust off and check on the condition (or
whether I even still have inserts) of the inserts.
I'll let you know what I find.

I am currently considering a two input/exhaust spintech muffler similar to
the one Tracy Crook flys (with one input/exhaust) out of 304 rather than the
321.  But, I need to determine how I will hang that

muffler before I spend

$245 on one.

Ed Anderson

Ed, go to this web site-

http://www.customaircraft.com/

and go to the products section, go to the Exhaust system cross reference, then down to Tail pipe support system. Take a look at the drawing. They charge $85 for that support, but I just copied the drawing and will make a few of my own to support the muffler.
I could not link directly to the drawing, hence the convoluted directions.
Brian Trubee

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.