Finn Lassen wrote:

 Trying to purchase a starter for Tracy's Re-drive.
 He specs a 1986-88 non-turbo RX7 manual transmission model.
 Apparently 1988 or later are supposed to be lighter.
 However, a search at www.RockAuto.com  gives:

 WORLD WIDE Part#16896, Mitsubishi, Permanet Magnet Planetary Gear
 Reduction $102 + $40 core
 (Also available at a local DiscountAutoParts store for $120 + $45

core).

 BOSCH Part#SR288X 2.0kW System, OEM NO=N327-18-400 (reman) $131 +

$66 core

 BOSCH Part#SR295X 1.4kW System, OEM NO=N326-18-400 (reman) $128 +

$55 core

 BOSCH Part#SR296X 1.2kW System, OEM NO=N318-18-400 (reman) $144 +

$55 core

 AC DELCO Part# #19012006 (#3231138) $130 + $55 core

 AC DELCO Part#3231137 (reman #19012005) $141 + $50 core

 AC DELCO Part#3231329 (reman #19012175) $149 + $50 core

 But no weight nor pictures!
 On  another web site I've seen a BOSCH F5000-27282 listed at 8.18

pounds.

 I sure would appreciate input from anybody who have weight and
 configuration data on these.
 I need the solenoid above the starter and lowest weight.

 Finn

Autozone prices this starter at $100 + $55 core.  This is a
Duralast-Import starter with a listed weight of 8.05 lb.  It has the
same part number as the WORLD WIDE starter that you found.  They also
list a BECK/ARNLEY starter for $180 + $55 Core with a weight of 0.1

lbs,

so I'm not sure I trust their weights.

Bob White

I did in fact get the Mitshubishi M1T707817X27 12V from AutoZone (turned

in my automatic

Mitshubishi M1T741816904 12V as core) at $100.

I actually think it's not direct drive; website listed it as planetary

gear.

AutoZone is by far the cheapest and has it as a store stock item (so you

can return it in case it

doesn't fit).

The starter I had on the Ross drive is about 2 - 2.5 pounds heavier, so

I just need to shave off 3

pounds from the mount plate and I'll break even on the weight.

The early version of Tracy's I have weighs in at 52 pounds including

starter, flywheel and all

hardware.
The Ross weighs in at 49 pounds.

If you're doing theoretical W&B for your airplane, do not disregard

hardware (bolts,  washers,

nuts, spacers).
Finn

Jim Brewer wrote:

Paul,
Finn should check out ebay--last night there was a rebuilt starter for a
"buy it now" price of $50.00

Jim Brewer

Speaking of low prices I see where Summit Racing has all aluminum radiators
in a bunch of sizes for $169.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.