Subject: Another paper on turbo compound.
From: ACRE NL
Date: 1/20/2003, 8:08 PM


Hi Paul, I remember about 5 or 6 years ago a retired aerospace engineer
in CA had a prototype 4cyl 2 stroke radial with the exhaust passing thru
a turbine that was connected to the crank. I think his surname was
Theobald. I'll try and look it up. There is nothing new under the sun.
Dave McC

Sometimes old ideas that have fallen out of favor become viable again
when the economic environment changes or there are some developments
in technology that change the balance back in their favor.
I think turbo compounding's time has come again.

Paul Lamar

Probably the most practical way to look at turbo compounding in auto
applications would be in a hybred vehicle. The turbine could drive a
 homopolar alternater at direct drive speeds to charge the electric
assist modes. This would uncouple the turbo rpm from drive shaft
rpm and avoid the complexity and losses of clutches and gears.

On an aircraft the weight and complexity of a hybred would be
excessive, but you could offload all accessories to the
electric system. - Vance J

Yes I was thinking that use in a hybrid would be rather a good 
application. A small turbo compound all aluminum wankel engine 
would save a bunch of size & weight over a small piston engine.
All you would need is a small alternator that would work at 
100,000 RPM. Probably not that hard to do. As an intermediate
step one stage of gear reduction would probably work with
an off the shelf alternator.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.