Hello Gang;

    I'm delighted to announce that the LAEV Blades are in transit to me

from

Perry's........
Yes, feast your eyes on these beauties designed by Bill Freeman, thank

you

Bill, who did an absolutely bang-up hi-tech job of it. Built by Perry

Mick,

whom as you all know is by no means a stranger to "Goo-Goo" construction

and

processes, what a great job!
Bill, Perry, if the Blade's performance matches their looks, there's

going to

be a lot of fast planes out there :)
This is the result of Perry's 1st iteration, of both "Recipe" and

"Technique".

The bad news is, the Blade came in over-weight (What else is new) :( at

9.5 lbs

each........The good news is, Paul and Perry both have put their heads

together

on the process and are very confident that the 2nd set will meet the

target

weight of 7 lbs. :)

We will however be employing these for testing the Hub which will be

subjected

to 26% higher centrifugal cyclic forces......GARGANTUAN would be an

under

statement.

Perry, chime in on this and edge protection etc. etc.

More after I have them installed on the Hub.
                                                       Butch

Great work Perry. I'll keep them for flight testing :)

Paul Lamar

Robin Ream wrote:

Is there ever going to be a three blade for us 20B guys?

Robin

I would not hold my breath Robin. This has been a monumental 3 year project and
we are not done yet. This must be tested on our torture test stand/dyno
and flight tested before even these are ready to be duplicated. 
A three blade design is a whole different animal.

Beside that this is a very small market for the foreseeable future. We will know 
more after this summer so we can evaluate the growth of rotary engines in airplanes.
We need more airplanes to show up at Sun n Fun, OSH, Copper State,
Arlington, etc. etc. That Power Sport Velocity crash was a set back IMHO.

I think Butch will agree with me on this.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.