George Lendich wrote:
Ian, did you mod the lube system on your Ross 2.85?
Paul Lamar
Yes, It appeared to me that the planet gears had inadequate
lubrication
and
my thrust bearing even less. I added a feed to the gears via an
existing
hole in the top of the stationary ring gear. 160hrs and still going
strong.
Ian.
Ian,
I'm trying to come to grips with the best lubrication system using the
Ford
Planetary.
Are you saying you feed a line into that fixed ring gear and sprayed
directly onto the planetary gears - did that provide adequate oil to all
the
gears and the thrust bearings?
What about the shaft bearings - still the same system !?
Any drawings on that Ian?
George (down under)
Hi George
Yes, there is a hole in the ring gear at the top. It appears that I have
adequate oil, bear in mind that my gearbox is a short version 11 3/4" and
that I do not have a top hat thrust bearing holder. Shaft bearings as
supplied.
Sorry no drawings. There might be some archive pictures.
Ian (also down under)
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.