Stopped up at the foundry on the way to the
hangar and low and behold they were pouring the intake
manifolds as I walked in. Will have the parts in the next
couple of days. Too hot to take with me.
Will fit all engines up to RX8 with some porting.
No porting required on four ports up to 93.

How many can handle just a raw casting?

Paul:
I want a raw intake manifold and a set of injector holders (for 4
injectors) - also raw.  These will make a nice intake - much cleaner than
what I have welded up.  Let me know the cost and your mailing address.  I'll
send you a check.

Regards,
Gaylen Lerohl
RV8

OK that is one set. That leaves eight sets out of the first batch
as I will be using one set my self.

Don't know the cost yet Gaylen. I'll know more in a
few days when I get the foundry bill.

BTW is anybody interested in having them polished? We have quite a
manufacturing infra structure for that sort of thing here in SoCal.

Paul Lamar

Rotary RX-6 wrote:

Hey Paul,
Are you using the manifold on your turbo 13B? If you are then I want to lay claim
to a set also. I am always trying to refine my machine.This manifold, I think
would work nicely. I have a gen 2 13B Turbo II. Please let me know. I would love
to have them polished as well, but I can do it if it is not reasonably priced!
Doug Mueller
RV-6 13BT
N900DM
Henderson,NV

Yes I am. There is no quantity advantage with polishing. Each one is hand
done. Some outfits are more inclined to take the job if there
is more than one. I will price polishing and let you know. 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.