Subject: Ross drive cudos & cons
From: ACRE NL
Date: 1/23/2003, 1:26 AM


Hi George
Yes, there is a hole in the ring gear at the top. It appears that I have
adequate oil, bear in mind that my gearbox is a short version 11 3/4"
and
that I do not have a top hat thrust bearing holder. Shaft bearings as
supplied.
Sorry no drawings. There might be some archive pictures.
Ian (also down under)
 Ian,

Thanks Mate ,
Yep, I got a ring gear and see the hole, I just wanted to make sure the oil
hole was sufficient, as Paul and Tracy suggest a line direct into the sun
gear, I looked at that hole and wondered if it would suffice for the other
thrust bearings etc.
BTW I didn't know there was a short version, where is the difference - in
the shaft, I'm guessing !?
George (down under)

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.