Subject: Can we do it? Turbo compound rotary.
From: ACRE NL
Date: 1/24/2003, 10:38 AM

I am beginning to believe WE can build a turbo charged Mazda  rotary
engine with a 20% decrease in fuel burn and a 20% increase in
power with no increased cooling load. That would put the
Mazda rotary well above ANY other aircraft engine including
the diesels. It would also have an unequaled power to weight
ratio for any intermittent combustion aircraft engine.

All we need to is extend the shaft out of the turbo charger
through the compressor inlet and feed it into one of these
off the shelf small and light weight (2.2 pounds) planetary 
gear boxes and thence into the eshaft using a cog or multi 
V belt drive. The belt final drive will serve to isolate 
the torque pulses.

http://www.tomsonindustries.com

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.