Snip
Most of the gyro guys are sticking to the 2.85 with the 12a or 13b set ups
due to the engine rpms and prop sizes... 78" warp drives 4 bladed, and
usually cut tips to minimize the sonic pops
I'll send a pic of the cut tips if anyone is interested
Gary Buster
Bridgeport, Texas
N263GB
Snip
Gary,
I would be interested in seeing photo of Warp drive tips. As a
side note are any of the gyro guys using Ivo props with 13B engines?
Kelly Troyer
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.