The intake runners are out of the foundry and in the heat
treaters. We will have everything back on Monday.

Paul Lamar

Paul, will these work with peripheral port engine?

Hans

Sure if you can live with 1.6 inches ID (41 MM).
You could have them extrude honed out to say 1.75 ID (44 MM).
If the demand gets large enough I will build some larger
ones.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.