Hi Michael Paul and list
I am working on a 2 seater tandem composite pusher,having twin booms
supporting an inverted V tail. Pilot and passenger will both have superb
vision as from a glider from ahead of the wing, and without canards struts
or such within view.
 I believe I have overcome the typical problem of a pusher of avoiding prop
strikes on takeoff and landing.
It will disassemble easily, like a glider, to fit into a custom trailer, to
avoid hangaring.
At this point I am still working on details of the design. One of the key
elements of the prototype construction will be sharing work on the plugs and
moulds amongst a small group , so that female moulding will be available  to
the group with a much reduced work load.
Perhaps we should email privately rather than bore the list with lots of
detail
David Hart

"Michael D. Lilja" wrote:

Hi David,

Thanks for the additional details.  Would very much like to talk more with you about it.  my email
is mlilja@usinternet.com  I will be out this weekend, but looking forward to learning more about
your work.

Mike Lilja

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.