Keith Moore and I were talking about this yesterday at the hangar.
Keith mentioned that people trying to convert an auto engine to
aircraft use frequently fail. Some problem arises that overwhelms
them. They give up. Usually liquid cooling or the PSRU. I believe
that Boeing or Lockheed would not give up but they have the enormous
resources to persevere and solve the problems. They do what ever
it takes.
We aim to prevent failure when it comes to wankel rotary engines. That is why
we are here sharing our considerable knowledge and experience.
Many rotaries are now flying without serious problems. That is a wonderful
start and assure the long term success of the rotary in aircraft use.
We aim to continue to provide the help that will make them faster and better.
If we are able to make the rotary powered airplanes faster that will garner
a lot of attention in the experimental aviation world and convince even
more people to use wankel rotary aircraft engine power.
We are not here to make money. We just strongly believe the wankel rotary
engine is the light aircraft engine of the future.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.
Dick Gregory wrote:
Your ongoing services are invaluable. I have been on this list for almost two years, and have yet to actually begin installation. I have a 13B built by David Atkins that will not be turbocharged. I have had lots of ideas that looked good to me but the expertise on this list had made me realize their weaknesses. My plan is to use currently successful methods for everything possible. If something is recommended by Paul, Tracy, Ed, Dave, etc. I will feel like enough thought and engineering have gone into it that I would not be able to improve on it.
For a while I was toying with the idea of building a carbon graphite engine mount which would provide plenty of strength and allow me to shape it and keep it away from exhaust heat, etc. I think the coverage of Powersport accident on this list saved me from that mistake when I realized that in the event of a fire under the cowl there would be nothing to hold the engine in the plane. I shouldn't admit to such stupid thinking should I?
The only thing that I plan on using that I don't feel has enough success in our environment is the exhaust augmentor. I plan on using it only to provide cooling airflow, although I may try later to find other uses for the exhaust. I would like to use the ejector specifications on the NACA test report if I can get someone to help me scale the dimensions from their 85 horsepower testbed to work with a 160 HP 13B.
I am finally ready to start installation. I have the airplane out of storage and in my workshop and the old engine removed. My finances are even finally adequate to begin work. The main problem is that I work and stay in Los Angeles and go home to Houston for a visit about once a month. So work will be slow but I expect I will be presenting more of a presence on this list as I encounter challenges and when I have milestones to report.
Dick Gregory
LongEZ N613NC
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.