avidair wrote:

Hi forgive my stupidness but I was wondering has there been alloy rotor end plates made for the
12a rotary , I have been an avid Subaru man with over 350 engines built and flying but the rotary
is the next progression do you know of anyone who has done this and perhaps a contact email or
website .

I would be very interested in finding out .

And please take a look at the aircraft that I designed and now manufacture its a 2 seat high
performance machine all composite see it at www.cobraaviation.com.au

Many thanks if you have any info or just your thoughts on the aircraft   Regards Tom Wickers

Your airplane looks very nice.

The 12A and the 13B are similar enough that the alloy end plates built and sold
by Racing Beat will probably fit the 12A. I would check with Racing Beat.

See our web site below for a link to Racing Beat.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.